D500 aerated concrete block — a strong masonry material with accurate dimensions, good thermal performance and easy workability.
- retains heat;
- does not burn;
- environmentally friendly and safe;
- has high strength.
House constructionturnkey aerated concrete in Perm
Warm, reliable and lasting aerated concrete homes for comfortable living in Perm and the Perm region.
Construction cost — from RUB 55 000/m²An accurate estimate depends on the design, plot and chosen package.
5-year warrantyWe fix the price in the contractQuality control at every stageOver 300 homes built
Free consultation and specialist site visit
Why aerated concrete is a great choice for a home
D500 aerated concrete block combines thermal performance, dimensional accuracy and sufficient strength for private homes when the design and correct masonry methods are followed.
Thermal performance
The material's porous structure helps reduce heat loss through external walls.
Accurate block dimensions
Accurate dimensions simplify masonry and allow thin joints.
Fast construction
The blocks' large size and low weight speed up wall construction.
Non-combustible material
Aerated concrete is a mineral material and does not support combustion.
Structural strength
Masonry reinforcement, lintels and a ring beam ensure reliable wall performance.
A choice of facade finishes
The house can be finished with brick, render, clinker or timber facade boarding.
Facade options for an aerated concrete house
Aerated concrete forms the load-bearing walls, while the facade defines the appearance and protects the structure from the elements. Finishes can include decorative render, facing or clinker brick, facade panels, timber boarding or a combination of these.
Aerated concrete house construction stages
We build in stages, from design and foundations to facade, building services and finishing. The exact scope of work depends on the chosen package.
- Design and estimate
We choose a design, agree the package and calculate construction costs.
- Site preparation
We account for ground conditions, set out the building and prepare the site for construction.
- Foundation
We determine the foundation type and structure from the design and site conditions.
- Aerated concrete wall construction
We build walls with D500 blocks, checking alignment and joint thickness.
- Reinforcement, lintels and ring beam
We install masonry reinforcement, lintels and the ring beam according to the design.
- Floor structures
We install floors according to the structural design.
- Roof
We install the rafter structure and roof covering according to the design.
- Windows, doors and weathertight shell
We install windows and an entrance door to protect the house from precipitation and wind.
- Facade, building services and finishes
We carry out facade, building services and finishing work according to the chosen package.
Completed aerated concrete homes
View all completed homesHomes built by April Premium in Perm and the Perm region —
with floor areas, structural details and construction timelines.
292 m² house
- Foundation
- reinforced concrete slab
- Walls
- aerated concrete
- Duration
- 7 months
243 m² house
- Foundation
- reinforced concrete slab
- Walls
- aerated concrete
- Duration
- 6 months
159 m² house
- Foundation
- strip foundation
- Walls
- aerated concrete
- Duration
- 4 months
Popular aerated concrete designs
Choose a suitable layout and find out the indicative cost of building an aerated concrete house.
aerated concrete
Shukhov design
- 106 m²
- 1 storey
- 3 bedrooms
Structural shell packagefrom RUB 5,8 million106 m² × RUB 55 000/m²
Rubanenko design
- 102 m²
- 1 storey
- 3 bedrooms
Structural shell packagefrom RUB 5,6 million102 m² × RUB 55 000/m²
Khvorinov design
- 104 m²
- 1 storey
- 3 bedrooms
Structural shell packagefrom RUB 5,7 million104 m² × RUB 55 000/m²
Indicative cost for the Shell package: design area × RUB 55 000/m². The final price depends on the site, foundations, structural design and chosen materials.
How much does an aerated concrete house cost?
The indicative cost depends on the area and chosen package.
Example estimate for a 100 m² house.
Example estimate for a 100 m² house
- Structural shellfrom RUB 55 000/m²100 m² × RUB 55 000/m²from RUB 5,5 million
- Weathertight shellfrom RUB 60 000/m²100 m² × RUB 60 000/m²from RUB 6 million
- White Boxfrom RUB 80 000/m²100 m² × RUB 80 000/m²from RUB 8 million
- Turnkeyfrom RUB 120 000/m²100 m² × RUB 120 000/m²from RUB 12 million
Aerated concrete or another material?
We compare the main characteristics of aerated concrete, brick and clay blocks. The final choice depends on the architecture, number of storeys, foundation design, facade and construction budget.
| Parameter | Aerated concrete | Brick | Clay block |
|---|---|---|---|
| Thermal performance | High, thanks to the material's porous structure. | Depends on wall thickness and additional insulation. | High, thanks to the block's hollow structure. |
| Masonry construction speed | High: large blocks speed up wall construction. | Lower: masonry uses small units. | High: large-format blocks are used. |
| Load on the foundations | Relatively low due to lighter masonry. | Higher due to the greater weight of brickwork. | Moderate compared with aerated concrete and brick. |
| Strength | Sufficient for a private home when the design and construction methods are followed. | Very high when masonry is correctly laid. | High when correct masonry methods are followed. |
| Facade finish | A protective exterior finish is required. | Facing brick can also form the finished facade. | Exterior finishing or cladding is usually required. |
| Construction considerations | Thin joints, masonry reinforcement, lintels and a ring beam are important. | Masonry takes more time and mortar. | Correct masonry, insulating mortar and purpose-made supplementary units are important. |
Aerated concrete
- Thermal performance
- High, thanks to the material's porous structure.
- Masonry construction speed
- High: large blocks speed up wall construction.
- Load on the foundations
- Relatively low due to lighter masonry.
- Strength
- Sufficient for a private home when the design and construction methods are followed.
- Facade finish
- A protective exterior finish is required.
- Construction considerations
- Thin joints, masonry reinforcement, lintels and a ring beam are important.
Brick
- Thermal performance
- Depends on wall thickness and additional insulation.
- Masonry construction speed
- Lower: masonry uses small units.
- Load on the foundations
- Higher due to the greater weight of brickwork.
- Strength
- Very high when masonry is correctly laid.
- Facade finish
- Facing brick can also form the finished facade.
- Construction considerations
- Masonry takes more time and mortar.
Clay block
- Thermal performance
- High, thanks to the block's hollow structure.
- Masonry construction speed
- High: large-format blocks are used.
- Load on the foundations
- Moderate compared with aerated concrete and brick.
- Strength
- High when correct masonry methods are followed.
- Facade finish
- Exterior finishing or cladding is usually required.
- Construction considerations
- Correct masonry, insulating mortar and purpose-made supplementary units are important.
This is a general comparison. Exact wall properties, foundation loads and final costs depend on the design, number of storeys, masonry thickness, material grade and structural details.
When to choose aerated concrete
Aerated concrete suits private homes where thermal performance, fast masonry construction and relatively low foundation loads are priorities. We determine the material and wall construction after the design is chosen and the site assessed.
Aerated concrete house FAQs
Yes. Aerated concrete is suitable for year-round homes when the walls, foundations, roof, facade and building services are correctly designed. The material's porous structure helps retain heat; indoor comfort also depends on heating, ventilation and construction quality.
Insulation requirements are determined by thermal calculations that account for block density and thickness, wall construction and climate. Some designs do not require additional insulation, but no single solution suits every home. A ventilated cavity is provided between the aerated concrete and facing brick.
An aerated concrete house can be finished with decorative render, facing or clinker brick, facade panels, timber boarding or a combination of these. The facade construction must protect the walls from the elements and allow moisture to escape correctly. We choose the specific solution to suit the house architecture and selected package.
The foundation type is selected after assessing the site, ground conditions, loads and structural design. Private homes may use a cast-in-place slab, strip foundations or a pile-and-ground-beam foundation. The designer makes the final decision; no single foundation suits all aerated concrete houses.
The timeline depends on the house area and architecture, foundation type, roof, facade, season and chosen package. We prepare an initial schedule after reviewing the design and site, and record the stages and deadlines in the contract. Building the shell takes less time than completing a home with building services and final finishes.
Yes. Bespoke design costs RUB 1 000/m². The design is developed around the site, layout, architecture and structural requirements. When a construction contract is signed, the bespoke design cost is deducted from the construction cost.
Aerated concrete is a building material; an aerated concrete block is a finished wall unit made from it. In everyday Russian, 'aerated concrete house' and 'aerated block house' are often used interchangeably. When choosing blocks, density, strength, dimensional accuracy and compliance with the design are important.
Cracking risks are reduced through correctly designed foundations, accurate masonry, thin joints, reinforcement, lintels and a ring beam. Work follows the design and the required construction sequence and methods. These measures improve structural reliability, but cannot guarantee the complete absence of cracks in every situation.
We will build your hometurnkey aerated concrete
We will prepare an initial estimate based on the design, area, material, package and site conditions.
- We fix the price in the contract
- Quality control at every stage
- Building in Perm and the Perm region